1995 American Standard Strat slot width?

Dimensions : Crown Width: Crown Height: Tang Height: Tang Width At Base: Note that the slot depth

1995 American Standard Strat slot width? You can measure the nut slot heights by placing a feeler gauge in between the bottom of the string and the top of the first fret when the guitar

Dimensions : Crown Width: Crown Height: Tang Height: Tang Width At Base: Note that the slot depth

vuejs slot If the crown width is around , these frets should fit If it is closer to , you have wider frets The tang width of these frets is approximately

You might need to joint the saw teeth if the kerf is too wide Use feeler gauges to measure the width of the saw kerf, and if it is too wide,

fret slot width A slot width of 023 is recommended for this fret wire, but somewhat wider may work if you use glue to set the frets in Be sure to measure the width

Most fret slotting profiles are a standard ″ width at the tang, our 18″ shank Fret Router bit works well for cutting 023″ fret slots It also can be